GB/T 16545-1996 金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除
作者:标准资料网 时间:2024-05-22 02:56:48 浏览:9389
来源:标准资料网
基本信息
标准名称: | 金属和合金的腐蚀 腐蚀试样上腐蚀产物的清除 |
英文名称: | Corrosion of metals and alloys—Removal of corrosion products from corrosion test specimens |
中标分类: |
冶金 >>
金属理化性能试验方法 >>
金属化学性能试验方法 |
ICS分类: |
冶金 >>
金属的腐蚀
|
发布部门: | 国家技术监督局 |
发布日期: | 1996-09-27 |
实施日期: | 1997-04-01 |
首发日期: | 1996-09-27 |
作废日期: | 1900-01-01 |
主管部门: | 中国钢铁工业协会 |
归口单位: | 全国钢标准化技术委员会 |
起草单位: | 冶金部钢铁研究总院 |
出版社: | 中国标准出版社 |
出版日期: | 1900-01-01 |
页数: | 11页 |
适用范围
本标准规定了金属及合金的腐蚀试样,在腐蚀性环境中形成腐蚀产物的清除操作方法。某些情况下,这些方法也可用于金属涂层,但必须考虑可能对基体产生的影响。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 冶金 金属理化性能试验方法 金属化学性能试验方法 冶金 金属的腐蚀
基本信息
标准名称: | 氨制冷系统安装工程施工及验收规范(附条文说明) |
英文名称: | Installation and acceptance specificatian for ammonia refrigeration system |
中标分类: |
工程建设 >>
工业设备安装工程 >>
机械设备安装工程 |
替代情况: | 被SBJ 12-2011代替 |
发布日期: | 2000-07-20 |
实施日期: | 2000-09-01 |
首发日期: | |
作废日期: | 2011-11-01 |
出版日期: | |
页数: | 27页 |
适用范围
没有内容
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 工程建设 工业设备安装工程 机械设备安装工程
Product Code:SAE AMS2281
Title:Trace Element Control, Nickel Alloy, Cobalt Alloy, and Iron Alloy Wrought Products, for High-Temperature, High-Stressed Applications
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope: This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products. Primarily for highly-stressed rotating parts, such as turbine discs, where control of trace elements is required to maintain elevated-temperature tensile, stress-rupture, creep, and low-cycle fatigue properties. It is intended that this specification be invoked only for selected applications by stipulation on drawings, purchase orders, or other documentation supplementing the material specification, or in material specifications. This specification covers four classes of trace element control, defined by the elements to be controlled as follows: Class 1 - Lead, Bismuth; Class 2 - Lead, Bismuth, Selenium; Class 3 - Lead, Bismuth, Selenium, Silver, Tin; Class 4 - Lead, Bismuth, Selenium, Silver, Tin, Thallium, Tellurium, Arsenic. When trace element control is required, the elements to be controlled shall be indicated by this specification number and the appropriate class number. For example, AMS 2281, Class 1 will indicate that control of lead and bismuth is required.