ASTM B 272-2001 有精制边缘的(轧制或拉制的)扁铜制品(扁丝和带)标准规范
作者:标准资料网 时间:2024-04-30 20:09:10 浏览:8646
来源:标准资料网
【英文标准名称】:StandardSpecificationforCopperFlatProductswithFinished(RolledorDrawn)Edges(FlatWireandStrip)
【原文标准名称】:有精制边缘的(轧制或拉制的)扁铜制品(扁丝和带)标准规范
【标准号】:ASTMB272-2001
【标准状态】:作废
【国别】:美国
【发布日期】:2001
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:配件;铜;扁平制品
【英文主题词】:flatproducts;fittings;copper
【摘要】:
【中国标准分类号】:H62
【国际标准分类号】:77_150_30
【页数】:6P;A4
【正文语种】:英语
MIL-PRF-39010E, PERFORMANCE SPECIFICATION COIL, RADIO FREQUENCY, FIXED, MOLDED, ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR (27 AUG 1997) [SUPERSEDING MIL-C-39010D]., This specification covers the general requirements for established reliability (ER) and nonestablished reliability (non-ER) fixed, radio frequency, molded coils. Established reliability radio frequency coils covered by this specification have failure rate levels (FRL) ranging from 1.0 percent per 1,000 hours to 0.001 percent per 1,000 hours which are established at a 60 percent confidence level (see 1.2.1.4). The FRL identified by the applicable symbol specified in table III refers to operation at full load cyclic condition at the specified ambient temperature (see 3.1).【英文标准名称】:StandardSpecificationforLow-CarbonNickel-Chromium-Molybdenum,Low-CarbonNickel-Chromium-Molybdenum-Copper,Low-CarbonNickel-Chromium-Molybdenum-Tantalum,andLow-CarbonNickel-Chromium-Molybdenum-TungstenAlloyPlate,Sheet,andStrip
【原文标准名称】:低碳镍铬钼、低碳镍铬钼铜、低碳镍铬钼钽和低碳镍铬钼钨合金板、薄板及带材的标准规范
【标准号】:ASTMB575-2006
【标准状态】:现行
【国别】:美国
【发布日期】:2006
【实施或试行日期】:
【发布单位】:美国材料与试验协会(ASTM)
【起草单位】:ASTM
【标准类型】:()
【标准水平】:()
【中文主题词】:合金;铬;配件;低碳;钼;镍;有色金属;板;薄板材;带材
【英文主题词】:Alloys;Chromium;Fittings;Lowcarbon;Molybdenum;Nickel;Non-ferrousmetals;Plates;Sheetmaterials;Strips
【摘要】:
【中国标准分类号】:H62
【国际标准分类号】:77_150_40
【页数】:4P;A4
【正文语种】:英语
